type 8195 d/... wire horizontal to pc board 2 pe + 4 3 pe + 6 4 pe + 8 5 pe + 10 6 pe + 12 7 pe + 14 8 pe + 16 9 pe + 18 10 pe + 20 50 50 50 50 50 50 50 20 20 6 9 12 15 18 21 24 27 30 wiecon wiecon pcb . no. 30 14 awg 300 v 10 a no. 20 12 awg for pe no. 30 14 awg 300 v 10 a no. 20 12 awg for ground qw 25.153.2253.0 25.153.2353.0 25.153.2453.0 25.153.2553.0 25.153.2653.0 25.153.2753.0 25.153.2853.0 25.153.2953.0 25.153.3053.0 50 50 50 50 50 50 50 50 20 25.153.6253.0 25.153.6353.0 25.153.6453.0 25.153.6553.0 25.153.6653.0 25.153.6753.0 25.153.6853.0 25.153.6953.0 25.153.7053.0 25.153.0253.0 25.153.0353.0 25.153.0453.0 25.153.0553.0 25.153.0653.0 25.153.0753.0 25.153.0853.0 25.153.0953.0 25.153.1053.0 25.153.4253.0 25.153.4353.0 25.153.4453.0 25.153.4553.0 25.153.4653.0 25.153.4753.0 25.153.4853.0 25.153.4953.0 25.153.5053.0 6 m 3 372 1.5 mm 2 1.5 mm 2 2.5 mm 2 11 pe + 22 up to 20 pe + 40 upon request 33 to 60pole upon request pc board connectors, rising cage clamp system spacing: 5.00 mm std. pack g t poles part no. part no. rated voltages vde 0110 ul ratings field/factory wiring csa ratings approvals unmarked spacing: 5.00 mm rated cross section: 1.5 mm 2 , pe 2.5 mm 2 rated current: 10 a connection range: 0.5 ?2.5 mm 2 solid 0.5 ?4.0 mm 2 (pe) 0.5 ?1.5 mm 2 fine stranded 0.5 ?2.5 mm 2 (pe) 250 v/4 kv/3 ?overvoltage category iii *690 v/4 kv/2 ?overvoltage category ii 1000 v/4 kv/1 ?overvoltage category i * max. 600 v for ungrounded networks or expected overvoltage 4 kv 12.50 17.50 22.50 27.50 32.50 37.50 42.50 47.50 52.50 7.50 12.50 17.50 22.50 27.50 32.50 37.50 42.50 47.50 type 8195 d/... vb1 unmarked initiator connectors spacing: 5.00 mm jumpered marked marked solder pin 0.5 x 1.0 mm bore hole 1.2 mm material: type 8195 d/... and type 8195 v/... insulating housing: pa 6/66, ul 94-v-0 clamping body: tin-plated brass contact clip with solder pin: tin-plated clamping screw: zinc-plated steel
type 8195 v/... wire horizontal to pc board wiecon 373 wiecon no. 30 14 awg 300 v 10 a no. 20 12 awg for pe no. 30 14 awg 300 v 10 a no. 20 12 awg for ground qw 6 m 3 1.5 mm 2 1.5 mm 2 2.5 mm 2 1.5 mm 2 2 pe + 6 3 pe + 9 4 pe + 12 5 pe + 15 6 pe + 18 7 pe + 21 8 pe + 24 9 pe + 27 10 pe + 30 50 50 50 50 50 50 50 20 20 8 12 16 20 24 28 32 36 40 25.154.2253.0 25.154.2353.0 25.154.2453.0 25.154.2553.0 25.154.2653.0 25.154.2753.0 25.154.2853.0 25.154.2953.0 25.154.3053.0 50 50 50 50 50 50 50 50 20 25.154.6253.0 25.154.6353.0 25.154.6453.0 25.154.6553.0 25.154.6653.0 25.154.6753.0 25.154.6853.0 25.154.6953.0 25.154.7053.0 25.154.0253.0 25.154.0353.0 25.154.0453.0 25.154.0553.0 25.154.0653.0 25.154.0753.0 25.154.0853.0 25.154.0953.0 25.154.1053.0 25.154.4253.0 25.154.4353.0 25.154.4453.0 25.154.4553.0 25.154.4653.0 25.154.4753.0 25.154.4853.0 25.154.4953.0 25.154.5053.0 rated cross section: 1.5 mm 2 , pe 2.5 mm 2 rated current: 10 a connection range: 0.5 ?2.5 mm 2 solid 0.5 ?4.0 mm 2 (pe) 0.5 ?1.5 mm 2 fine stranded 0.5 ?2.5 mm 2 (pe) 250 v/4 kv/3 ?overvoltage category iii *690 v/4 kv/2 ?overvoltage category ii 1000 v/4 kv/1 ?overvoltage category i * max. 600 v for ungrounded networks or expected overvoltage 4 kv std. pack g t poles part no. part no. rated voltages vde 0110 ul ratings field/factory wiring csa ratings approvals bore hole plan type 8195 d/... and type 8195 v/... solder pin 0.5 x 1.0 mm bore hole 1.2 mm 11 pe + 33 up to 20 pe + 60 upon request 44 to 80pole upon request unmarked spacing: 5.00 mm 12.50 17.50 22.50 27.50 32.50 37.50 42.50 47.50 52.50 7.50 12.50 17.50 22.50 27.50 32.50 37.50 42.50 47.50 type 8195 v/... vb1 unmarked initiator connectors spacing: 5.00 mm jumpered marked marked
|
